You Might Like

Phonetics is a branch of linguistics that studies the sounds of human speech, or—in the case of sign languages—the equivalent aspects of sign.[5] It is concerned with the physical properties of speech sounds or signs (phones): their physiological production, acoustic properties, auditory perception, and neurophysiological status.

Phonetics as a research discipline has three main branches:[6]

Phonetic insight is used in several applied linguistic fields such as:

Phonology, on the other hand, is concerned with the abstract, grammatical characterization of systems of sounds or signs and how they pattern in and across languages. Phonology has been argued to relate to phonetics via the set of distinctive features, which map the abstract representations of speech units to articulatory gestures, acoustic signals or perceptual representations.[8][9][10]


The first known phonetic studies were carried out as early as the 6th century BCE by Sanskrit grammarians.[11] The Hindu scholar Pāṇini is among the most well known of these early investigators, whose four-part grammar, written around 350 BCE, is influential in modern linguistics and still represents "the most complete generative grammar of any language yet written".[12] His grammar formed the basis of modern linguistics and described several important phonetic principles, including voicing. This early account described resonance as being produced either by tone, when vocal folds are closed, or noise, when vocal folds are open. The phonetic principles in the grammar are considered "primitives" in that they are the basis for his theoretical analysis rather than the objects of theoretical analysis themselves, and the principles can be inferred from his system of phonology.[13]

Advancements in phonetics after Pāṇini and his contemporaries were limited until the modern era, save some limited investigations by Greek and Roman grammarians. In the millennia between Indic grammarians and modern phonetics, the focus shifted from the difference between spoken and written language, which was the driving force behind Pāṇini's account, and began to focus on the physical properties of speech alone. Sustained interest in phonetics began again around 1800 CE with the term "phonetics" being first used in the present sense in 1841.[14][11] With new developments in medicine and the development of audio and visual recording devices, phonetic insights were able to use and review new and more detailed data. This early period of modern phonetics included the development of an influential phonetic alphabet based on articulatory positions by Alexander Melville Bell. Known as visible speech, it gained prominence as a tool in the oral education of deaf children.[11]

Before the widespread availability of audio recording equipment, phoneticians relied heavily on a tradition of practical phonetics to ensure that transcriptions and findings were able to be consistent across phoneticians. This training involved both ear training—the recognition of speech sounds—as well as production training—the ability to produce sounds. Phoneticians were expected to learn to recognize by ear the various sounds on the International Phonetic Alphabet and the IPA still tests and certifies speakers on their ability to accurately produce the phonetic patterns of English (though they have discontinued this practice for other languages).[15] As a revision of his visible speech method, Melville Bell developed a description of vowels by height and backness resulting in 9 cardinal vowels.[16] As part of their training in practical phonetics, phoneticians were expected to learn to produce these cardinal vowels in order to anchor their perception and transcription of these phones during fieldwork.[15] This approach was critiqued by Peter Ladefoged in the 1960s based on experimental evidence where he found that cardinal vowels were auditory rather than articulatory targets, challenging the claim that they represented articulatory anchors by which phoneticians could judge other articulations.[17]


Consonants are speech sounds that are articulated with a complete or partial closure of the vocal tract. They are generally produced by the modification of an airstream exhaled from the lungs. The respiratory organs used to create and modify airflow are divided into three regions: the vocal tract (supralaryngeal), the larynx, and the subglottal system. The airstream can be either egressive (out of the vocal tract) or ingressive (into the vocal tract). In pulmonic sounds, the airstream is produced by the lungs in the subglottal system and passes through the larynx and vocal tract. Glottalic sounds use an airstream created by movements of the larynx without airflow from the lungs. Click consonants are articulated through the rarefaction of air using the tongue, followed by releasing the forward closure of the tongue.

Consonants are pronounced in the vocal tract, usually in the mouth. In order to describe the place of articulation, the active and passive articulator need to be known. In most cases, the active articulators are the lips and tongue. The passive articulator is the surface on which the constriction is created. Constrictions made by the lips are called labials. Constrictions can be made in several parts of the vocal tract, broadly classified into coronal, dorsal and radical places of articulation. Coronal articulations are made with the front of the tongue, dorsal articulations are made with the back of the tongue, and radical articulations are made in the pharynx.[18] These divisions are not sufficient for distinguishing and describing all speech sounds.[18] For example, in English the sounds [s] and [ʃ] are both coronal, but they are produced in different places of the mouth. To account for this, more detailed places of articulation are needed based upon the area of the mouth in which the constriction occurs.[19]

Articulations involving the lips can be made in three different ways: with both lips (bilabial), with one lip and the teeth (labiodental), and with the tongue and the upper lip (linguolabial).[20] Depending on the definition used, some or all of these kinds of articulations may be categorized into the class of labial articulations. Ladefoged and Maddieson (1996) propose that linguolabial articulations be considered coronals rather than labials, but make clear this grouping, like all groupings of articulations, is equivocal and not cleanly divided.[21] Linguolabials are included in this section as labials given their use of the lips as a place of articulation.

Bilabial consonants are made with both lips. In producing these sounds the lower lip moves farthest to meet the upper lip, which also moves down slightly,[22] though in some cases the force from air moving through the aperture (opening between the lips) may cause the lips to separate faster than they can come together.[23] Unlike most other articulations, both articulators are made from soft tissue, and so bilabial stops are more likely to be produced with incomplete closures than articulations involving hard surfaces like the teeth or palate. Bilabial stops are also unusual in that an articulator in the upper section of the vocal tract actively moves downwards, as the upper lip shows some active downward movement.[24]

Labiodental consonants are made by the lower lip rising to the upper teeth. Labiodental consonants are most often fricatives while labiodental nasals are also typologically common.[25] There is debate as to whether true labiodental plosives occur in any natural language,[26] though a number of languages are reported to have labiodental plosives including Zulu,[27] Tonga,[28] and Shubi.[26] Labiodental affricates are reported in Tsonga[29] which would require the stop portion of the affricate to be a labiodental stop, though Ladefoged and Maddieson (1996) raise the possibility that labiodental affricates involve a bilabial closure like "pf" in German. Unlike plosives and affricates, labiodental nasals are common across languages.[25]

Linguolabial consonants are made with the blade of the tongue approaching or contacting the upper lip. Like in bilabial articulations, the upper lip moves slightly towards the more active articulator. Articulations in this group do not have their own symbols in the International Phonetic Alphabet, rather, they are formed by combining an apical symbol with a diacritic implicitly placing them in the coronal category.[30][31] They exist in a number of languages indigenous to Vanuatu such as Tangoa, though early descriptions referred to them as apical-labial consonants. The name "linguolabial" was suggested by Floyd Lounsbury given that they are produced with the blade rather than the tip of the tongue.[31]

Coronal consonants are made with the tip or blade of the tongue and, because of the agility of the front of the tongue, represent a variety not only in place but in the posture of the tongue. The coronal places of articulation represent the areas of the mouth where the tongue contacts or makes a constriction, and include dental, alveolar, and post-alveolar locations. Tongue postures using the tip of the tongue can be apical if using the top of the tongue tip, laminal if made with the blade of the tongue, or sub-apical if the tongue tip is curled back and the bottom of the tongue is used. Coronals are unique as a group in that every manner of articulation is attested.[30][32] Australian languages are well known for the large number of coronal contrasts exhibited within and across languages in the region.[33]

Dental consonants are made with the tip or blade of the tongue and the upper teeth. They are divided into two groups based upon the part of the tongue used to produce them: apical dental consonants are produced with the tongue tip touching the teeth; interdental consonants are produced with the blade of the tongue as the tip of the tongue sticks out in front of the teeth. No language is known to use both contrastively though they may exist allophonically.

Alveolar consonants are made with the tip or blade of the tongue at the alveolar ridge just behind the teeth and can similarly be apical or laminal.[34]

Crosslinguistically, dental consonants and alveolar consonants are frequently contrasted leading to a number of generalizations of crosslinguistic patterns. The different places of articulation tend to also be contrasted in the part of the tongue used to produce them: most languages with dental stops have laminal dentals, while languages with apical stops usually have apical stops. Languages rarely have two consonants in the same place with a contrast in laminality, though Taa (ǃXóõ) is a counterexample to this pattern.[35] If a language has only one of a dental stop or an alveolar stop, it will usually be laminal if it is a dental stop, and the stop will usually be apical if it is an alveolar stop, though for example Temne and Bulgarian[36] do not follow this pattern.[37] If a language has both an apical and laminal stop, then the laminal stop is more likely to be affricated like in Isoko, though Dahalo show the opposite pattern with alveolar stops being more affricated.[38]

Retroflex consonants have several different definitions depending on whether the position of the tongue or the position on the roof of the mouth is given prominence. In general, they represent a group of articulations in which the tip of the tongue is curled upwards to some degree. In this way, retroflex articulations can occur in several different locations on the roof of the mouth including alveolar, post-alveolar, and palatal regions. If the underside of the tongue tip makes contact with the roof of the mouth, it is sub-apical though apical post-alveolar sounds are also described as retroflex.[39] Typical examples of sub-apical retroflex stops are commonly found in Dravidian languages, and in some languages indigenous to the southwest United States the contrastive difference between dental and alveolar stops is a slight retroflexion of the alveolar stop.[40] Acoustically, retroflexion tends to affect the higher formants.[40]

Articulations taking place just behind the alveolar ridge, known as post-alveolar consonants, have been referred to using a number of different terms. Apical post-alveolar consonants are often called retroflex, while laminal articulations are sometimes called palato-alveolar;[41] in the Australianist literature, these laminal stops are often described as 'palatal' though they are produced further forward than the palate region typically described as palatal.[33] Because of individual anatomical variation, the precise articulation of palato-alveolar stops (and coronals in general) can vary widely within a speech community.[42]

Dorsal consonants are those consonants made using the tongue body rather than the tip or blade.

Palatal consonants are made using the tongue body against the hard palate on the roof of the mouth. They are frequently contrasted with velar or uvular consonants, though it is rare for a language to contrast all three simultaneously, with Jaqaru as a possible example of a three-way contrast.[43]

Velar consonants are made using the tongue body against the velum. They are incredibly common cross-linguistically; almost all languages have a velar stop. Because both velars and vowels are made using the tongue body, they are highly affected by coarticulation with vowels and can be produced as far forward as the hard palate or as far back as the uvula. These variations are typically divided into front, central, and back velars in parallel with the vowel space.[44] They can be hard to distinguish phonetically from palatal consonants, though are produced slightly behind the area of prototypical palatal consonants.[45]

Uvular consonants are made by the tongue body contacting or approaching the uvula. They are rare, occurring in an estimated 19 percent of languages, and large regions of the Americas and Africa have no languages with uvular consonants. In languages with uvular consonants, stops are most frequent followed by continuants (including nasals).[46]

Radical consonants either use the root of the tongue or the epiglottis during production.[47]

Pharyngeal consonants are made by retracting the root of the tongue far enough to touch the wall of the pharynx. Due to production difficulties, only fricatives and approximants can produced this way.[48][49]

Epiglottal consonants are made with the epiglottis and the back wall of the pharynx. Epiglottal stops have been recorded in Dahalo.[50] Voiced epiglottal consonants are not deemed possible due to the cavity between the glottis and epiglottis being too small to permit voicing.[51]

Glottal consonants are those produced using the vocal folds in the larynx. Because the vocal folds are the source of phonation and below the oro-nasal vocal tract, a number of glottal consonants are impossible such as a voiced glottal stop. Three glottal consonants are possible, a voiceless glottal stop and two glottal fricatives, and all are attested in natural languages.[30]

Glottal stops, produced by closing the vocal folds, are notably common in the world's languages.[51] While many languages use them to demarcate phrase boundaries, some languages like Huatla Mazatec have them as contrastive phonemes. Additionally, glottal stops can be realized as laryngealization of the following vowel in this language.[52] Glottal stops, especially between vowels, do usually not form a complete closure. True glottal stops normally occur only when they're geminated.[53]

Knowing the place of articulation is not enough to fully describe a consonant, the way in which the stricture happens is equally important. Manners of articulation describe how exactly the active articulator modifies, narrows or closes off the vocal tract.[54]

Stops (also referred to as plosives) are consonants where the airstream is completely obstructed. Pressure builds up in the mouth during the stricture, which is then released as a small burst of sound when the articulators move apart. The velum is raised so that air cannot flow through the nasal cavity. If the velum is lowered and allows for air to flow through the nose, the result in a nasal stop. However, phoneticians almost always refer to nasal stops as just "nasals".[54]Affricates are a sequence of stops followed by a fricative in the same place.[55]

Fricatives are consonants where the airstream is made turbulent by partially, but not completely, obstructing part of the vocal tract.[54] Sibilants are a special type of fricative where the turbulent airstream is directed towards the teeth,[56] creating a high-pitched hissing sound.[57]

Nasals (sometimes referred to as nasal stops) are consonants in which there's a closure in the oral cavity and the velum is lowered, allowing air to flow through the nose.[58]

In an approximant, the articulators come close together, but not to such an extent that allows a turbulent airstream.[57]

Laterals are consonants in which the airstream is obstructed along the center of the vocal tract, allowing the airstream to flow freely on one or both sides.[57] Laterals have also been defined as consonants in which the tongue is contracted in such a way that the airstream is greater around the sides than over the center of the tongue.[59] The first definition does not allow for air to flow over the tongue.

Trills are consonants in which the tongue or lips are set in motion by the airstream.[60] The stricture is formed in such a way that the airstream causes a repeating pattern of opening and closing of the soft articulator(s).[61] Apical trills typically consist of two or three periods of vibration.[62]

Taps and flaps are single, rapid, usually apical gestures where the tongue is thrown against the roof of the mouth, comparable to a very rapid stop.[60] These terms are sometimes used interchangeably, but some phoneticians make a distinction.[63] In a tap, the tongue contacts the roof in a single motion whereas in a flap the tongue moves tangentially to the roof of the mouth, striking it in passing.

During a glottalic airstream mechanism, the glottis is closed, trapping a body of air. This allows for the remaining air in the vocal tract to be moved separately. An upward movement of the closed glottis will move this air out, resulting in it an ejective consonant. Alternatively, the glottis can lower, sucking more air into the mouth, which results in an implosive consonant.[64]

Clicks are stops in which tongue movement causes air to be sucked in the mouth, this is referred to as a velaric airstream.[65] During the click, the air becomes rarefied between two articulatory closures, producing a loud 'click' sound when the anterior closure is released. The release of the anterior closure is referred to as the click influx. The release of the posterior closure, which can be velar or uvular, is the click efflux. Clicks are used in several African language families, such as the Khoisan and Bantu languages.[66]


Vowels are syllabic speech sounds that are pronounced without any obstruction in the vocal tract.[67] Unlike consonants, which usually have definite places of articulation, vowels are defined in relation to a set of reference vowels called cardinal vowels. Three properties are needed to define vowels: tongue height, tongue backness and lip roundedness.

Vowels that are articulated with a stable quality are called monophthongs; a combination of two separate vowels in the same syllable is a diphthong.[68]

In the IPA, the vowels are represented on a trapezoid shape representing the human mouth: the vertical axis representing the mouth from floor to roof and the horizontal axis represents the front-back dimension.[69]

Vowel height traditionally refers to the highest point of the tongue during articulation.[70] The height parameter is divided into four primary levels: high (close), close-mid, open-mid and low (open). Vowels whose height are in the middle are referred to as mid. Slightly opened close vowels and slightly closed open vowels are referred to as near-close and near-open respectively. The lowest vowels are not just articulated with a lowered tongue, but also by lowering the jaw.[71]

While the IPA implies that there are seven levels of vowel height, it is unlikely that a given language can minimally contrast all seven levels. Chomsky and Halle suggest that there are only three levels,[72] although four levels of vowel height seem to be needed to describe Danish and it's possible that some languages might even need five.[73]

Vowel backness is dividing into three levels: front, central and back. Languages usually do not minimally contrast more than two levels of vowel backness. Some languages claimed to have a three-way backness distinction include Nimboran and Norwegian.[74]

In most languages, the lips during vowel production can be classified as either rounded or unrounded (spread), although other types of lip positions, such as compression and protrusion, have been described. Lip position is correlated with height and backness: front and low vowels tend to be unrounded whereas back and high vowels are usually rounded.[75] Paired vowels on the IPA chart have the spread vowel on the left and the rounded vowel on the right.[76]

Together with the universal vowel features described above, some languages have additional features such as nasality, length and different types of phonation such as voiceless or creaky. Sometimes more specialized tongue gestures such as rhoticity, advanced tongue root, pharyngealization, stridency and frication are required to describe a certain vowel.[77]

Acoustic and auditory phonetics

Acoustic phonetics deals with the acoustic properties of speech sounds. The sensation of sound is caused by pressure fluctuations which cause the eardrum to move. The ear transforms this movement into neural signals that the brain registers as sound. Acoustic waveforms are records that measure these pressure fluctuations.[78]

Auditory phonetics studies how humans perceive speech sounds. Due to the anatomical features of the auditory system distorting the speech signal, humans do not experience speech sounds as perfect acoustic records. For example, the auditory impressions of volume, measured in decibels (dB), does not linearly match the difference in sound pressure.[79]

The mismatch between acoustic analyses and what the listener hears is especially noticeable in speech sounds that have a lot of high-frequency energy, such as certain fricatives. To reconcile this mismatch, functional models of the auditory system have been developed.[80]


The larynx, commonly known as the "voice box", is a cartilaginous structure in the trachea responsible for phonation. The vocal folds (chords) are held together so that they vibrate, or held apart so that they do not. The positions of the vocal folds are achieved by movement of the arytenoid cartilages.[81] The intrinsic laryngeal muscles are responsible for moving the arytenoid cartilages as well as modulating the tension of the vocal folds.[82] If the vocal folds are not close or tense enough, they will either vibrate sporadically or not at all. If they vibrate sporadically it will result in either creaky or breathy voice, depending on the degree; if don't vibrate at all, the result will be voicelessness. In addition to correctly positioning the vocal folds, there must also be air flowing across them or they will not vibrate. The difference in pressure across the glottis required for voicing is estimated at 1 – 2 cm H20 (98.0665 – 196.133 pascals).[83] The pressure differential can fall below levels required for phonation either because of an increase in pressure above the glottis (superglottal pressure) or a decrease in pressure below the glottis (subglottal pressure). The subglottal pressure is maintained by the respiratory muscles. Supraglottal pressure, with no constrictions or articulations, is equal to about atmospheric pressure. However, because articulations—especially consonants—represent constrictions of the airflow, the pressure in the cavity behind those constrictions can increase resulting in a higher supraglottal pressure.[84]

The lungs are the engine that drives nearly all speech production, and their importance in phonetics is due to their creation of pressure for pulmonic sounds. The most common kinds of sound across languages are pulmonic egress, where air is exhaled from the lungs.[85] The opposite is possible, though no language is known to have pulmonic ingressive sounds as phonemes.[86] Many languages such as Swedish use them for paralinguistic articulations such as affirmations in a number of genetically and geographically diverse languages.[87] Both egressive and ingressive sounds rely on holding the vocal folds in a particular posture and using the lungs to draw air across the vocal folds so that they either vibrate (voiced) or do not vibrate (voiceless).[85] Pulmonic articulations are restricted by the volume of air able to be exhaled in a given respiratory cycle, known as the vital capacity.

The lungs are used to maintain two kinds of pressure simultaneously in order to produce and modify phonation. To produce phonation at all, the lungs must maintain a pressure of 3–5 cm H20 higher than the pressure above the glottis. However small and fast adjustments are made to the subglottal pressure to modify speech for suprasegmental features like stress. A number of thoracic muscles are used to make these adjustments. Because the lungs and thorax stretch during inhalation, the elastic forces of the lungs alone can produce pressure differentials sufficient for phonation at lung volumes above 50 percent of vital capacity.[88] Above 50 percent of vital capacity, the respiratory muscles are used to "check" the elastic forces of the thorax to maintain a stable pressure differential. Below that volume, they are used to increase the subglottal pressure by actively exhaling air.

During speech, the respiratory cycle is modified to accommodate both linguistic and biological needs. Exhalation, usually about 60 percent of the respiratory cycle at rest, is increased to about 90 percent of the respiratory cycle. Because metabolic needs are relatively stable, the total volume of air moved in most cases of speech remains about the same as quiet tidal breathing.[89] Increases in speech intensity of 18 dB (a loud conversation) has relatively little impact on the volume of air moved. Because their respiratory systems are not as developed as adults, children tend to use a larger proportion of their vital capacity compared to adults, with more deep inhales.[90]

Voicing and phonation types

An important factor in describing the production of most speech sounds is the state of the glottis—the space between the vocal folds. Muscles inside the larynx make adjustments to the vocal folds in order to produce and modify vibration patterns for different sounds. Two canonical examples are modal voiced, where the vocal folds vibrate, and voiceless, where they do not. Modal voiced and voiceless consonants are incredibly common across languages, and all languages use both phonation types to some degree. Consonants can be either voiced or voiceless, though some languages do not make distinctions between them for certain consonants.[1] No language is known to have a phonemic voicing contrast for vowels, though there are languages, like Japanese, where vowels are produced as voiceless in certain contexts. Other positions of the glottis, such as breathy and creaky voice, are used in a number of languages, like Jalapa Mazatec, to contrast phonemes while in other languages, like English, they exist allophonically. Phonation types are modeled on a continuum of glottal states from completely open (voiceless) to completely closed (glottal stop). The optimal position for vibration, and the phonation type most used in speech, modal voice, exists in the middle of these two extremes. If the glottis is slightly wider, breathy voice occurs, while bringing the vocal folds closer together results in creaky voice.[91]

There are several ways to determine if a segment is voiced or not, the simplest being to feel the larynx during speech and note when vibrations are felt. More precise measurements can be obtained through acoustic analysis of a spectrogram or spectral slice. In a spectrographic analysis, voiced segments show a voicing bar, a region of high acoustic energy, in the low frequencies of voiced segments.[92] In examining a spectral splice, the acoustic spectrum at a given point in time a model of the vowel pronounced reverses the filtering of the mouth producing the spectrum of the glottis. A computational model of the unfiltered glottal signal is then fitted to the inverse filtered acoustic signal to determine the characteristics of the glottis.[93] Visual analysis is also available using specialized medical equipment such as ultrasound and endoscopy.[92][2]

For the vocal folds to vibrate, they must be in the proper position and there must be air flowing through the glottis.[83] The normal phonation pattern used in typical speech is modal voice, where the vocal folds are held close together with moderate tension. The vocal folds vibrate as a single unit periodically and efficiently with a full glottal closure and no aspiration.[94] If they are pulled farther apart, they do not vibrate and so produce voiceless phones. If they are held firmly together they produce a glottal stop.[91]

If the vocal folds are held slightly further apart than in modal voicing, they produce phonation types like breathy voice (or murmur) and whispery voice. The tension across the vocal ligaments (vocal cords) is less than in modal voicing allowing for air to flow more freely. Both breathy voice and whispery voice exist on a continuum loosely characterized as going from the more periodic waveform of breathy voice to the more noisy waveform of whispery voice. Acoustically, both tend to dampen the first formant with whispery voice being more extreme deviations. [95]

Holding the vocal folds more tightly together results in a creaky voice. The tension in across the vocal folds is less than in modal voice, but they are held tightly together resulting in only the ligaments of the vocal folds vibrating.[3] The pulses are highly irregular, with low pitch and frequency amplitude.[96]

When producing speech, the articulators move through and contact particular locations in space resulting in changes to the acoustic signal. Some models of speech production take this as the basis for modeling articulation in a coordinate system that may be internal to the body (intrinsic) or external (extrinsic). Intrinsic coordinate systems model the movement of articulators as positions and angles of joints in the body. Intrinsic coordinate models of the jaw often use two to three degrees of freedom representing translation and rotation. These face issues with modeling the tongue which, unlike joints of the jaw and arms, is a muscular hydrostat like an elephant trunk that lacks joints.[97] Because of the different physiological structures, movement paths of the jaw are relatively straight lines during speech and mastication, while movements of the tongue follow curves.[98]

Straight-line movements have been used to argue articulations as planned in extrinsic rather than intrinsic space, though extrinsic coordinate systems also include acoustic coordinate spaces, not just physical coordinate spaces.[97] Models that assume movements are planned in extrinsic space run into an inverse problem of explaining the muscle and joint locations which produce the observed path or acoustic signal. The arm, for example, has seven degrees of freedom and 22 muscles, so multiple different joint and muscle configurations can lead to the same final position. For models of planning in extrinsic acoustic space, the same one-to-many mapping problem applies as well, with no unique mapping from physical or acoustic targets to the muscle movements required to achieve them. Concerns about the inverse problem may be exaggerated, however, as speech is a highly learned skill using neurological structures which evolved for the purpose.[99]

The equilibrium-point model proposes a resolution to the inverse problem by arguing that movement targets be represented as the position of the muscle pairs acting on a joint.[4] Importantly, muscles are modeled as springs, and the target is the equilibrium point for the modeled spring-mass system. By using springs, the equilibrium point model can easily account for compensation and response when movements are disrupted. They are considered a coordinate model because they assume that these muscle positions are represented as points in space, equilibrium points, where the spring-like action of the muscles converges.[100][101]

Gestural approaches to speech production propose that articulations are represented as movement patterns rather than particular coordinates to hit. The minimal unit is a gesture that represents a group of "functionally equivalent articulatory movement patterns that are actively controlled with reference to a given speech-relevant goal (e.g., a bilabial closure)."[102] These groups represent coordinative structures or "synergies" which view movements not as individual muscle movements but as task-dependent groupings of muscles which work together as a single unit.[103][104] This reduces the degrees of freedom in articulation planning, a problem especially in intrinsic coordinate models, which allows for any movement that achieves the speech goal, rather than encoding the particular movements in the abstract representation. Coarticulation is well described by gestural models as the articulations at faster speech rates can be explained as composites of the independent gestures at slower speech rates.[105]

Sign languages

Unlike spoken languages, words in sign languages are perceived with the eyes instead of the ears. Signs are articulated with the hands, upper body and head. Various factors – such as muscle flexibility or being considered taboo – restrict what can be considered a sign.[106]

The main articulators are the hands and arms. Relative parts of the arm are described with the terms proximal and distal. Proximal refers to a part closer to the torso whereas a distal part is further away from it. For example, a wrist movement is distal compared to an elbow movement. Due to requiring less energy, distal movements are generally easier to produce.[106]

Unlike spoken languages, sign languages have two identical articulators: the hands. Signers may use whichever hand they prefer with no disruption in communication. Due to universal neurological limitations, two-handed signs generally have the same kind of articulation in both hands; this is referred to as the Symmetry Condition.[106] The second universal constraint is the Dominance Condition, which holds that when two handshapes are involved, one hand will remain stationary and have a more limited set handshapes compared to the dominant, moving hand.[107] Additionally, it is common for one hand in a two-handed sign to be dropped during informal conversations, a process referred to as weak drop.[106]

Just like words in spoken languages, coarticulation may cause signs to influence each other's form. Examples include the handshapes of neighboring signs becoming more similar to each other (assimilation) or weak drop (an instance of deletion).[108]

Native signers do not look at their conversation partner's hands. Instead, their eye gaze is fixated on the face. Because peripheral vision is not as focused as the center of the visual field, signs articulated near the face allow for more subtle differences in finger movement and location to be perceived.[109]


Phonetic transcription is a system for transcribing phones that occur in a language, whether oral or sign. The most widely known system of phonetic transcription, the International Phonetic Alphabet (IPA), provides a standardized set of symbols for oral phones.[110][111] The standardized nature of the IPA enables its users to transcribe accurately and consistently the phones of different languages, dialects, and idiolects.[110][112][113] The IPA is a useful tool not only for the study of phonetics, but also for language teaching, professional acting, and speech pathology.[112]

While no sign language has a standardized writing system, linguists have developed their own notation systems that describe the handshape, location and movement. The Hamburg Notation System (HamNoSys) is similar to the IPA in that it allows for varying levels of detail. Some notation systems such as KOMVA and the Stokoe system were designed for use in dictionaries; they also make use of alphabetic letters in the local language for handshapes whereas HamNoSys represents the handshape directly. SignWriting aims to be an easy-to-learn writing system for sign languages, although it has not been officially adopted by any deaf community yet.[114]

See also

You Might Like